CFD0302 SERIES-ZG Tianxin

CFD0302 SERIES

Decoupling And Coupling Inductor

Resource Download

Datasheet

3D Model

P/N	Inductance(±20%,μH) 1-2=4-3	Leakage Inductance(μH,Max.) 1-2	DCR(Ω,Max.) 1-2=4-3	Saturation Currrent(A)	Rated Current(A)
P/N	Inductance(±20%,μH) 1-2=4-3	Leakage Inductance(μH,Max.) 1-2	DCR(Ω,Max.) 1-2=4-3	Saturation Currrent(A)	Both Windings	One Winding

P/N	Inductance(±20%,μH) 1-2=4-3	Leakage Inductance(μH,Max.) 1-2	DCR(Ω,Max.) 1-2=4-3	Saturation Currrent(A)	Rated Current(A)
P/N	Inductance(±20%,μH) 1-2=4-3	Leakage Inductance(μH,Max.) 1-2	DCR(Ω,Max.) 1-2=4-3	Saturation Currrent(A)	Both Windings	One Winding
CFD0302-1R0M	1	0.09	0.13	2.2	1.08	1.52
CFD0302-1R5M	1.5	0.11	0.2	1.8	0.86	1.2
CFD0302-1R8M	1.8	0.13	0.27	1.6	0.78	1.1
CFD0302-2R2M	2.2	0.14	0.3	1.6	0.75	1.05
CFD0302-3R3M	3.3	0.16	0.34	1.2	0.67	0.94
CFD0302-4R7M	4.7	0.18	0.5	0.88	0.54	0.76
CFD0302-6R8M	6.8	0.22	0.62	0.79	0.49	0.69
CFD0302-100M	10	0.28	1.04	0.6	0.38	0.53
CFD0302-150M	15	0.37	1.42	0.51	0.32	0.46
CFD0302-180M	18	0.42	1.55	0.48	0.31	0.44
CFD0302-220M	22	0.48	1.89	0.44	0.28	0.4
CFD0302-330M	33	0.63	2.84	0.36	0.23	0.32
CFD0302-470M	47	0.81	4.03	0.3	0.19	0.27
CFD0302-680M	68	1.13	6.11	0.26	0.16	0.22
CFD0302-101M	100	1.5	8.54	0.22	0.13	0.19
CFD0302-121M	120	1.76	9.23	0.2	0.13	0.18
CFD0302-151M	150	2.22	12.4	0.18	0.11	0.16
CFD0302-181M	180	2.79	15.32	0.17	0.1	0.14
CFD0302-221M	220	3.56	18.56	0.15	0.09	0.13
CFD0302-331M	330	5.18	27.7	0.12	0.07	0.1

NOTES:

1. All electrical specifications are referenced to 25°C± 5°C ambient.

2. The inductance is measured at 100 MHz, 0.1 Vrms, 0 ADC.

3. The leakage Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC between pins 1 and 2, and with other pins shorted.

4. The saturation current means DC current at 25°C that causes an initial inductance drop of 30% approx.

5. The rated current means DC current at 25°C that causes an temperature rise of 40°C approx.

Temperature rise is highly dependent on many factors including PCB land pattern, trace size, and proximity to other components.

Therefore temperature rise should be verified in application conditions.